High-Performance 915MHz Industrial Radio Remote Control Kits

Engineered for the rugged Australian environment, these ENGMATTEC 915MHz radio remote control systems offer professional-grade reliability for mobile hydraulic and pneumatic machinery . Whether you are operating a tilt tray, crane, wood chipper, or skip bin truck, this system provides a secure, interference-free link to your equipment .

We offer these kits in 4, 8, or 12-button configurations, with the optional integration of 5-way, 3-position pneumatic solenoid coils featuring 1/8" BSPP ports for air-actuated valves and systems .

Advanced Frequency Hopping Technology

Unlike entry-level remotes, this system utilises 915MHz frequency hopping technology . This military-grade logic allows multiple transmitters to operate in the same vicinity without signal jamming or cross-interference, making it the primary choice for busy industrial sites .

• Operational Range: Reliable signal transmission up to 60 metres .
• Compliance: Specifically tuned for Australian and New Zealand frequencies (915MHz) .
• Customisable Logic: Internal 'dip' switches allow for easy customisation, such as 'latching' specific buttons to stay active until pressed again .

Technical Specifications

• Voltage Compatibility: Universal 12V or 24V DC power input .
• Enclosure: Receiver is housed in a professional waterproof enclosure .
• Transmitter Protection: The handheld unit includes a high-visibility Silicone case for impact and water resistance .
• Wiring: Supplied with a comprehensive wiring loom . Standard kits are wired for 6 buttons, with 8 or 12-button wiring available upon request .
• Pneumatic Option: Optional 5-way, 3-position solenoids with 1/8" BSPP ports .

Master Inventory & Compatibility

Technician’s Advice

When installing the receiver, we strongly recommend a 5-amp fuse on the power lead to protect the internal circuitry .

While the receiver is waterproof, mounting it inside the cab or a dry area will extend the service life of the components and wiring loom .

Please note that this unit acts as the "brain"; you will still require electrical relays or solenoid coils (like our optional pneumatic bank) to physically actuate your machine's valves .

If you damage a handpiece on-site, don't panic—we stock replacement 915MHz transmitters "off-the-shelf" to keep your downtime to a

Please send us a message for more information.
Email: sales@hydraulic.online
Phone: 07 5563 1982
Hours: 8 am to 5 pm Monday - Friday, excluding public holidays

If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online

915MHz 8-button Radio Remote Control Kit with Transmitter and Receiver mounted in Waterproof Enclosure.

***Please note this is for use in Australia, New Zealand customers should check local regulations,

Optional 5 way, 3 position pneumatic solenoids, 1/8" BSPP Ports

Designed for Multipurpose or Universal fit. These are quality Australian Designed and Built.
Weather-resistant and suitable for use on trucks, tilt trays, cranes, as well as other mobile machinery such as Wood Chippers, Stump Grinders, Compactors, and Skip bin trucks.

The remote receiving unit simply needs power, 12v or 24 volts. You receive a transmitter/receiver box, with a wiring loom plus the 8-button weatherproof remote unit. Also Compatible with ELSIMA Remote Control devices.

It comes with comprehensive instructions for fitting & setting up.

Unlike other remote control units, replacement remotes are available at a reasonable cost if you ever run one over, forget and leave behind on a job or just lose it. The remote has a 60-meter transmit range.

The 915MHz signal uses "frequency hopping" that allows multiple transmitters to be used in close proximity to each other without interference or jamming.

The "frequency hopping" technology is usually only found on expensive equipment and military applications.
This makes it an ideal choice for commercial and or industrial applications.

Please note, that your remote control system will require some sort of electric switch relay or solenoid coils to actuate the functions or valves you want to remotely control. These "solenoids or switches or relays" are what your new remote control will hook up to.

Feel free to call us for more info regarding your intended or current application. 07 5563 1981
The receiver has the advantage of being easily customizable. Using basic 'dip' switches inside, you are able to 'latch' certain buttons to stay on until pressed off again, etc.

As standard, with wiring loom to run 6 buttons but we can wire up all 8 buttons and functions for $ extra, contact us. You can also retrofit the extra wires at a later stage "down the track'.

It is recommended a 5 amp fuse be installed on the power lead to the receiver.
Try and mount the receiver in a dry area. The range will still work well if mounted in your Cab!

The Handheld 8-button transmitter has a Silicone case for extra water resistance, however, please be aware that it is not 100 % waterproof.
Replacement Handpieces are 'Off the shelf at for less than $200.

MM 20/02/2026 $ pic Seo