Hydraulic Spin On Oil Suction Filter with 90 micron Stainless Steel Mesh Filter rated to flow between:

• 100 to 120 Lt/min with 3/4" inch BSPP Filter Head and Ports and 4" diameter spin on Filter Cartridge.
• 250 to 300 Lt/min with 1-1/4" inch BSPP Filter Head and Ports with 5" diameter spin on Filter Cartridge .

Hydraulic equipment is generally used and operated in some of the harshest environments around and if damaged they are expensive to replace.
The Long term reliability of hydraulic equipment is greatly enhanced if the Hydraulic Oil is continuously Strained and filtered.

These filters are designed for Suction applications. The head units are available with either (3/4" or 1-1/4" BSPP threads and ports) also available as an option is a Clog gauge. 0 - 30Hg.

These suction filters use a 90 micron Stainless steel mesh net for the filtration media this allows for high suction flows of 100 Lpm to 300 Lpm respectively with minimal pressure drop in the Suction losses.

Please note that the longer the "B" length on the Suction Filter the lower the Suction loss or Pressure Drop.

These Filter and Filter head combinations are Quality items and are manufactured using the latest Filtration materials and technology by FaiFiltri in Italy.

Please note; most hydraulic systems only require RETURN filtration. Suction side filtration can affect clear oil suction to your pumps, ie can cause cavitation leading to premature wear. Ensure the highest flow possible to your pump
Aluminium Alloy Filter Head complete with Vacuum visual gauge plus a "Clogged filter" internal bypass set at 5 PSI and Buna "N" O ring seal,

Two Filter Head options: with Inlet and Outlet ports of either 3/4" (100Lt/min Flow) or 1-1/4" BSPP (300 Lt/min Flow).
On the top of the Filter Head are two M10 x 1.5 threaded holes 38 mm apart for mounting the filter assembly to a bracket or machine framework.

Specifications

• Max Oil Flow Rate for 3/4", 90 microns 120 litres / Minute ( 30 US GPM)
• Max Oil Flow Rate for 1-1/4" 90 microns 300 litres / Minute ( 75 US GPM)
• Ports; 3/4" BSPP or 1-1/4" BSPP
• Max Operating Pressure 12 Bar (174 PSI)
• Max Differential pressure 4 Bar (58 PSI)
• Burst Pressure 25 Bar (363 PSI)
• Filter head internal Bypass Pressure 5 PSI
• Filter media = 90 Micron Stainless Steel Mesh.
• Operating Temperature -25 to +110 degrees C
• Filtered Media = Suitable with All Mineral Oils, Fuels, Glycol/Water solutions, and Most Synthetic oils.

Email: sales@mhfgc.com.au
Phone: 07 5563 1982
Hours: 8 am to 4 pm Monday - Friday,
8 to 12 pm Saturdays excluding public holidays and long weekends

If you have any questions please don’t hesitate to contact us
Best regards,
Hydraulic.Online

Improper Selection, Installation, Implementation, And/Or Operation By Anyone Other Than Persons With Appropriate Technical And Mechanical Training Can Result In Damage To Equipment Or Property, Serious Personal Injury, Or Death. Proper Precautions And Safety Procedures Should Be Implemented Prior To The Installation And Operation Of Equipment.

MM 3/02/2025 $ abc, options