Made to your exacting needs such as length, thread type, and quantity.
This listing is for a 1/4" 5,800psi (400 bar) two-wire hydraulic hose complete with crimped-on ends.

The custom hose assembly is available with either

JIC 7/16" or 9/16" Female swivel nut or Male hose tail or a 90-degree swept bend elbow or,

1/4" or 3/8" BSP. Female swivel nut or taper Male hose tail or a 90-degree swept bend elbow or,

9/16 or 11/16 ORFS Female swivel nut or Male hose tail or a 90-degree swept bend elbow

Please note that if you require 90 degree elbows at each end: of the hose, one end will be a one piece swept bend elbow and the other end will be made of a straight female and a Male / Female 90 degree elbow. This is to allow you easy installation in the field and to also obtain the correct angular orientation.

Hose fittings used will either be Two piece crimp / swage on type.
Assembled and crimped to the length of your choice.
Threads sizes & Hose tail end options are in the price box.

If you would like a specific length made please buy the closest size
(must be longer than you need) & message us with the overall exact length required.
Always measure from the very end of the fittings on both ends ( OA = Overall length) as per photos.
We also have straight, 45°, and 90° adaptors in our other listings.

Click here to view our range of available adaptors and elbows

Please see the thread charts if unsure of the thread.
Note for accuracy it is always better to measure the OD of the Male thread.