Where the aluminium VLP runs out of capacity, the VLP200P takes over — a steel bodied inline relief valve rated to 200 L/min at 350 bar through 1" BSPP ports.

The steel body handles the higher pressure and the pressure cycling that comes with heavy duty work: excavator attachments, log splitters, presses and any circuit where an aluminium body would be marginal.

Manufactured by CBF Hydraulic, Montecchio Maggiore, Italy. Recommended oil viscosity 10–420 cSt, working temperature −20 to +90 °C, absolute filtration 25 µm. All valves supplied set to the standard factory pressure unless you tell us otherwise — note your required setting in the order comments and we will set it before despatch at no charge.

Technicians Advice

Steel body for a reason: at 200 L/min a relief event is a hammer blow, and aluminium bodies fatigue. Mount it rigidly, plumb full-bore both sides, and set with a gauge - relieving 200 L/min at pressure is serious heat, so if it works often the circuit needs redesign, not a bigger valve.

Official Datasheet

📄 CBF VLP Factory Datasheet (PDF)

Typical applications: System over-pressure protection for gear pumps, power packs and log splitters. Protecting a hydraulic motor circuit? See our crossline relief valves.