Hydraulic Tandem Gear Pump suits Dingo 950P / K93
This is a high-quality Italian-made hydraulic tandem gear pump designed to replace the one in your Dingo 950P. This will bolt straight on, & you can reconnect your hoses. The port sizing for some models maybe vary from what we supply (port specs below). If they are different let us know and we can assist with supply of apaptors. If your machine is running slower than it used, to & is finding it harder to lift heavy loads, there is a big chance your pump is worn, & is allowing oil to bypass when pushed hard. You will be able to reuse your hose adapters, changing O'rings is recommended.
We also have a pump to suit the Diesel model. see the options
If you are unsure about identifying your pump, please clean & send a photo of numbers & letters stamped in the body of all pumps. We may be able to interpret this for you. Please send us a message for any inquiries or extra fittings.

Port Sizing:

Front pump

• Suction = ¾” BSPP (OEM =1/2" BSPP)
• Pressure = ½”BSPP

Rear pump

• Suction -= ½”BSPP (OEM = 3/8" BSPP, re-use adaptor from front pump)
• Pressure = 3/8”BSPP

Email: sales@hydraulic.online
Phone: 07 5563 1982
If you have any questions please don’t hesitate to contact us for further assistance,
Best regards, Hydraulic.Online

DM$ 31/01/24

RE#01-07-2024