
Group 3 hydraulic gear pumps, 14.9 to 86.9cc - DIN, SAE B and 105mm spigot mounts up to 200 litres per minute for excavators, wheel loaders and high-flow truck bodies.
Group 3 is the big aluminium and cast iron frame: 14.9 to 86.9 cm3/rev, 45 to 200 litres a minute, drives to 57 kW. This is what runs high-flow tipper hoists, larger PTO gearbox installations, timber and recycling gear, drill rigs and industrial power units.
Available in 4 bolt DIN and SAE B 2 bolt mounts with 1:8 tapered, 7/8 inch keyed and 7/8 inch 13-tooth splined shafts, clockwise or anti-clockwise, with BSPP or flanged ports. Group 3 pumps move real oil, so suction line sizing matters more here than on any smaller frame - undersize the inlet and the pump will cavitate and fail early. Call us if you want the suction line checked before you order.









