Ayrtec Reusable Ferrules for 1 & 2 Wire Hydraulic Hose

Replacement screw-on reusable ferrules (sockets) for field fit hose tails. Wind onto the hose anti-clockwise, screw the nipple home, done - no crimper needed, and the ferrule can be re-used when the hose retires.

Use the dropdown to choose hose size and hose type.

Fits: SAE 100R1AT (one wire) and 100R2AT (two wire) hydraulic hose, and our reusable hose tail nipples.

Sizes & Part Numbers

Technicians Advice

Cut the hose square, do not skive. Oil the threads, wind the ferrule on anti-clockwise until it bottoms, back off half a turn, then screw the oiled nipple in until it seats. Match one wire ferrules to 100R1 hose and two wire to 100R2 - they are not interchangeable.

Buy in bulk and save: 5+ units −5%, 10+ −10%, 25+ −12.5%, 50+ −15% — applied automatically in the cart.

Need help? Call us on 1300 146 737 or email sales@mhfgc.com.au.

Express shipping Australia-wide. We dispatch daily to New South Wales, Victoria, Queensland, Western Australia, South Australia, Tasmania, the Australian Capital Territory and the Northern Territory – Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, plus regional and remote sites.