Pair of 1/2 body Quick-connect Flat Face hydraulic couplers with 1-1/16" inch UNO threaded connection.

Oil flows to 115 Lt/min working pressure rated to 5,000 psi (350 bar)
Free: Pair of Dust Caps with every purchase.

This type of Coupler is Ideal for UNO adaptors and UNO Hydraulic hose ends.

Designed for use in dusty earthmoving environments for quick connect and disconnect without tools and almost no oil loss or leakage.

Used extensively on BOBCAT, DINGO, DITCH WITCH, and YANMAR and in fact most small to medium-sized earthmoving machinery and attachments.

1/2" flat face couplers are the most common size for machines used in Australia.
This type has a 1-1/16" UNO Female Thread.

Specifications

Click here for VD Type Screw together hydraulic Couplers

click here for VV type Screw together hydraulic couplers

Disconnection of any quick disconnect / quick release coupling whilst under full system pressure can be very dangerous and should not be attempted.

It is easy to check compatibility and it only takes a minute. Please refer to our size charts in photos for correct sizing. The best measurement to use is 'J' column. **

Please note, this sale is ONLY for 1-1/16" UNO threaded 1/2" Nominal Bore Couplers

This series of couplings are designed for use in excavator hammer and Auger circuits and other applications,

that experience high-pressure pulses.

Construction plant, mobile equipment, general industrial, mining and agricultural.

These 1/2" body flat face couplers are compatible with;

DNP PLT4, Stucchi FIRG/A Series, Faster 2FFI , Hansen QA, Ryco R110-06/08, Safeway FF49, Aeroquip FD89/FD49