Petrol & Diesel Power Packs

Store/Power Packs and Hydraulic Power Units 12 & 24 VDC, 240 & 415 VAC, Petrol or Diesel/Petrol & Diesel Power Packs

Petrol & Diesel Hydraulic Power Packs

Built for Where the Power Grid Isn't.

No mains power. No three-phase. No problem. Our engine-driven HPUs are built for the job site, the farm, the hire fleet, and the workshop — complete units or engine-only for repowers and DIY builds. Ships Australia-wide.

👷 Tradies & Contractors

Remote job sites, civil works, construction. Drive post drivers, compactors, rock breakers and shoring equipment — no generator needed.

🚗 Farmers & Rural Operators

Log splitters, post hole diggers, fence post drivers, workshop presses. Diesel units preferred for extended run times and lower fuel cost per hour.

🏭 Hire Fleets & Industrial

Start reliably, run all day, withstand rough handling. Built to commercial duty cycles with field-serviceable components and 3-year engine warranty.

Complete Power Packs

Affordable Petrol Hydraulic Power Packs

7hp or 14hp gross

60PE010H278B: 7hp gross (6hp net), 8 LPM @ 3,600 RPM
CH440-3280: 14hp gross (11.9hp net), 21 LPM @ 3,600 RPM
P&T or Double Acting (Cetop 3 solenoid)
Recoil start standard 7hp — electric start 14hp
18L reservoir standard — upgrades available
Max 3,000 PSI / 200 Bar

Ideal for contractors, mobile applications & remote job sites.

View Listing →

Diesel Hydraulic Power Packs

Yanmar L-Series — 6.1hp or 8.8hp max

L70N: 6.1hp max (5.5hp cont.), 8 LPM @ 3,000 RPM
L100N: 8.8hp max (7.7hp cont.), 14.2 LPM @ 3,000 RPM
P&T or Double Acting (Cetop 3 solenoid)
Direct injection, air-cooled, recoil or electric start
18L reservoir standard — upgrades available
Max 3,000 PSI / 200 Bar

Preferred for farms, hire fleets & extended-duty applications.

View Listing →

Engines & Pump Assemblies Available Separately

Kohler Command PRO Petrol Engines

CH270 — 7hp gross | CH440 — 14hp gross

CH270: 7hp gross / 6hp net @ 3,600 RPM
CH440: 14hp gross / 11.9hp net @ 3,600 RPM
Horizontal shaft, recoil or electric start
3/4" shaft (CH270) — 1" shaft (CH440)
Air-cooled, single cylinder, OHV

Suits our Kohler-shaft pump/tank/valve assembly.

View Listing →

Yanmar L-Series Diesel Engines

L70N5 — 6.1hp max | L100N5 — 8.8hp max

L70N5: 6.1hp max / 5.5hp cont. @ 3,000 RPM
L100N5: 8.8hp max / 7.7hp cont. @ 3,000 RPM
Recoil or electric start, 1" shaft
127mm BCD, 146mm mounting spigot
Direct injection, air-cooled, 4-stroke

Suits our Yanmar-shaft pump/tank/valve assembly.

View Listing →

Pump / Tank / Valve Assembly

BYO Engine — Kohler, Yanmar or Honda shaft

Suits Kohler CH270 / CH440 shaft
Suits Yanmar L70N / L100N shaft
Also suits Honda GX engines
P&T or Double Acting (Cetop 3)
18L reservoir standard
Max 3,000 PSI / 200 Bar

Ideal for repowers, DIY builds & engine swaps.

Affordable Diesel Engines

7hp, 11hp, 13hp & 19hp options

7hp, 11hp, 13hp & 19hp models in stock
Single cylinder, air-cooled diesel
Electric start standard
Cost-effective alternative to Yanmar
Suits hydraulic, irrigation & pressure washer use

Budget-conscious builds without sacrificing reliability.

View Listing →

Kohler KDW1003 Diesel Engine

26.1hp — 3-Cylinder, Water-Cooled

26.1hp / 3-cylinder water-cooled diesel
Heavy-duty industrial applications
Suits high-flow HPU builds
Electric start
Kohler commercial warranty

For demanding applications requiring sustained high power output.

View Listing →

Honda GX Petrol Engines

Single Cylinder & V-Twin — Coming Soon

Single cylinder GX series
V-Twin GX series
Suits pump/tank/valve assembly
Models & specs to be confirmed

Listings coming soon — contact us to register interest.

Coming Soon

Valve Configuration Options

P&T Ports Only

Pressure & tank ports only
Connect your own monoblock or sectional valve
Ideal for log splitters, tip trailers, presses
Lowest cost base configuration

1 × Double Acting

1 × Cetop 3 solenoid, closed centre
12V DC — suits engine starting battery
Pendant or push-button switch ready
Controls 1 double-acting cylinder or motor

2 × Double Acting

Base valve + 1 sandwich valve
Controls 2 independent functions
12V DC solenoids
Cost-plus option — see listing options or contact us

3 × Double Acting

Base valve + 2 sandwich valves
Maximum 3 spools total
Controls 3 independent functions
Cost-plus option — see listing options or contact us

Non-standard spool centres available: Tandem Centre, Open Centre, Float, Single Acting. Contact us to discuss your application.

Tank upgrades: 21L, 22L, 30L, 38L available as cost-plus options. Larger tanks reduce oil temperature on extended-duty cycles.

Port Standard — 9/16" UNO SAE6# (Read Before Ordering Hose)

All units are fitted with 9/16" UNO (SAE6#) O-ring face seal ports. A JIC/UNO adaptor is required to connect standard JIC hose assemblies. For BSPP hose ends, use a BSPP × JIC adaptor at the hose end plus a JIC/UNO adaptor at the port. See our adaptor range for the fittings you need.

⚠ Tank Installation — Warranty Condition

The oil reservoir must be properly supported and isolated against vibration during installation. Improper mounting that allows the tank to flex or bear external load will void the tank warranty.

Freight — Australia-Wide Delivery

These units are heavy and freight is calculated based on your delivery location. For remote areas or if you'd like a freight estimate before ordering, call us on (07) 5563 1982 or contact us online.

Not Sure Which Unit Is Right for Your Application?

Tell us what you're powering — cylinder bore, stroke, cycle speed, duty cycle — and we'll spec the right unit for the job.

(07) 5563 1982

Refine by

Sort by