Drain and sewer cleaning nozzles, adaptors and blank ends. A jetting nozzle does two jobs at once: the rear jets pull the hose along the pipe and clear the wall behind it, and any forward jet cuts what is in front. The balance between the two is what makes a nozzle a puller or a cutter.

Choose by thread, by flow, and by the number and direction of jets. A nozzle with three rear jets and one forward will travel and cut; all rear jets will travel further and clean more wall. The nozzle has to be matched to the machine flow - an oversized nozzle bleeds pressure and stops pulling, an undersized one spikes pressure and can stall the pump. Kits and boxes are listed separately if you would rather start with a set.