Drain Cleaning Screwdriver Nozzle

The general purpose end of the drain range - standard DC and sewer heads by size, screwdriver nozzles for hard blockages, negotiators that get around bends other heads jam in, hydro-excavation heads, grease balls, sand spades and the Rotospin rotating heads. Plus the bullet blank and compressor adaptors that let one head run on different hose ends. All current stock.

Ways to buy this nozzle:

Choose your size

What is in the box

• One drain nozzle, head or adaptor as selected
• Items marked "complete" include the cone, plug or QR adaptor stated
• Plain heads are the nozzle alone

Technicians Advice

Nozzle size on a jetter is the whole ballgame and most people get it from the previous head rather than the machine. Work it out properly once: the head is sized so that at your pump flow it develops the rated pressure, and if it is too big the pressure falls away and you get flushing without cutting, too small and the machine sits in bypass and heats the water until the pump seals go.

Write your correct size on the machine in marker so the next person does not guess.

On adaptors - the bullet blank and compressor adaptors exist so you can run a small head on a bigger hose end, and they are stainless for a reason. Do not substitute a brass plumbing fitting; at 5,000 psi in a line you cannot see, a failed adaptor means a loose head and a retrieval job.

Keep the heads in a box, not loose in the van. The jets are precision drilled and a head that has been rattling around in a toolbox with spanners will have burred jets and a wandering pattern.

Complete your setup

Browse Mustang Drain Jetting NozzlesBrowse Root Cutting and Specialty Drain NozzlesAll Drain Jetting Nozzles

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.