STAUFF Digital Inline Hydraulic Flow Meter, test your hydraulic system with flows up to 400 Lt/min and pressures to 420 bar (6,000 psi)

This hydraulic flow testing unit is used for measuring the flow rate of fluids in mobile and industrial hydraulics.

It is designed with a loading valve: for the strain test of the hydraulic system to facilitate precise control of the operating pressure. Suitable for 30-400 LPM , Max.: 420 bar (6,000 psi), Max.: 110 °C (230 °F)

The DHT 1 Series Digital Hydraulic Testers accurately measure flow, pressure and temperature. The tester is designed to conveniently check the performance of hydraulic pumps, motors, valves and hydrostatic transmissions.

This easy to use diagnostic tester has simplified controls and can pinpoint hydraulic system faults, reducing downtime and helping in preventive maintenance.

The tester comprises a turbine flow block: and a large easy to read digital display which indicates both flow and temperature.

The tester has a built-in loading valve: to simulate the working pressure during normal machine operation. The built-in safety discs protect the machine and operator in event of excessive pressure, allowing oil to safely bypass the loading valve INTERNALLY with no spillage of oil from the hydraulic circuit, eliminating clean-up costs and environmental hazards.

Optional Calibration Certificate: this certificate is an optional extra.

The Unit needs to be calibrated & recorded at Stauff NSW Head office. Please allow 2 weeks for this procedure. This is an additional cost.

Features

• ▪ Suitable for Mineral Oil (Aluminium), HFC Fluids. Not suitable for water.
• Bi-Directional, preferred direction (more accurate) as per arrows.
• Designed for in-line installation
• 1" BSPP Ports,
• Auto power off after 20 minutes.
• Although the Bi-Directional tester can be used in both flow directions, the preferred direction is
• indicated by the larger arrow on the panel. When the tester is used for reverse flow tests, slightly

• lower accuracies may be obtained depending on the oil viscosity, density and compressibility
• Dimensions; 240 (9.45”) wide, 200 (7.87”) deep, 200 (7.87”) high
• Weight. Unpacked 6.5Kg (14lbs)
• Calibration All testers are calibrated with 21cSt oil as standard. Calibration certificates are available on request - this is a chargeable option.
• Installation It is recommended to connect the flow block with flexible hoses 1-2 metres (3-6ft) long. All connections should be made by suitable qualified personnel.

IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

MM 05/06/2025 abc SEO