DINGO K93 & K94 PARKER WHEEL MOTORS GENUINE

Store/Motors Gear Geroler Orbital Radial

Product Details

Weight: 18.00 kg

DINGO K93 & K94 PARKER WHEEL MOTORS GENUINE

These are genuine Parker made in USA drive motors to suit Dingo K94/93. These can also fit some Dingo 950 Classic AWD, & McLoughlin Outlaw Mini Skid Steer Loader. It is always best to send us a photo of the numbers on the back of your motor for confirmation.

The main difference to check is shaft, These are 1.3/8", NOT 1.1/4". If you check the Code on the back of your motor, towards the middle of the part number there should be '19', this means 1.3/8" shaft. An '08' indicates 1.1/4". We cannot supply 1.1/4", however it 'may' be possible to replace the wheel hub coupler to a 1.3/8" however we do not sell these.

These are the original factory fit wheel motors. No wheel nut supplied.

TGO475US190AABP-D 475cc 7/8 UN O-ring 1 3/8 tapered Shaft

NOTE:

WHEN REPLACING A WHEEL MOTOR. IT IS HIGHLY RECOMMENDED YOU SHOULD REPLACE THE LINES,

FLUSH THE TANK, AND INSTAL A NEW OIL FILTER AND FILL IT WITH NEW OIL.

NOT DOING SO COULD CAUSE THE HYDRO PUMP TO FAIL DUE TO

CONTAMINATION IN THE SYSTEM

We can supply a large range of Parker drive motors for many OTHER machines at excellent prices. Please send us a photo of the model plate found on the back of most Parker motors.

RL 20.06.23