K93 and K94 DINGO Mini Loaders PARKER 4 Bolt Wheel mount Hydraulic Motor with 475 cc displacement and 1-3/8" tapered shaft.

These are genuine Parker made in USA drive motors to suit Dingo K94/93. These can also fit some Dingo 950 Classic AWD, & McLoughlin Outlaw Mini Skid Steer Loader. It is always best to send us a photo of the numbers on the back of your motor for confirmation.

The main difference to check is shaft, These are 1.3/8" 1:8 tapered Shafts, NOT 1.1/4".

If you check the Code on the back of your motor, towards the middle of the part number there should be '19', this means 1.3/8" shaft. An '08' indicates 1.1/4".

We cannot supply 1.1/4" in genuine Parker, however we can supply Non Genuine European made Heavy Duty Geroler hydraulic motors with 1-1/4" or 1-3/8", 1:8 tapered shafts with lock nuts,

As mentioned above, also Available with great savings are Non Genuine European Made 4 bolt wheel mount Motors: with 471 cc Displacement, 1-1/4" or 1-3/8", 1:8 taper Shaft with 7/8" UNO ports. Please see Options.

These are the original factory fit wheel motors. No wheel nut supplied.

Please note: as with all new hydraulic pumps and motors a 10 minute low to medium duty Run-In period is recommended before applying full pressure and load.