3 Port Hydraulic Cartridge Valve Manifold or Body in Steel or 6061-T6 Aluminium with 3 Way BSPP Ports and series 08 or 10 cavities with UNO Threads

These are a compact 3 way high Pressure (210 bar) Aluminium, or (350 bar) Steel 3 port manifold or body to fit a variety of Series 08 and Series 10 Cartridge Valves.

For Example

A Three way Two Position Spool Type Cartridge Valve with a (12, 24 or 240 volt) Solenoid coil, that will

• When de-energized, the valve allows flow between port 2 and port 1 while blocking flow at port 3.
• When energized, the cartridge's spool shifts to allow flow between ports 1 and 3 while blocking flow at port 2.

Please use the images, & descriptions below to match up to your requirements. Cartridges & coils can all be purchased separately from other listings please see links Below

Please note

Common Cavity 08 = 3/4" x 16 TPI UNO thread

Common Cavity 10 = 7/8" x 14 TPI UNO thread

Please ensure cavity sizes match up.

We also have two or four port manifolds in another listing see links below

.

With the use of these manifolds together with solenoid cartridges, you are able to block oil, flow, Relief pressure, flow control etc

Manifolds available with BSPP port sizes, 1/4" and 3/8"

We carry a full range of hydraulic fittings, adaptors & hosing. Please call us on 0755 631 982 or email us at sales@hydraulic.online with any questions

IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

MM 14/03/2025 abc SEO Options