High Power Dc P&T Power Unit
This 24 Volt DC Power unit is an alternative to a mechanical PTO pump. It is a high-output DC 4.0kW Fan Cooled motor unit. This comes with 4.2cc pumps, (these may be upsized for no, or little extra cost, see below).

It does not come with an oil tank. We do have a unit with a tank also. It is a pressure & suction setup from the pump. This unit can only be used intermittently, see the duty cycle below.

This unit will lift high tonnage, but keep in mind this unit draws high amperage. High-quality batteries are required. It is ideal for medium-large cranes (you can hook up your valve micro switch auto start as per the diagram) or Medium-tipper trucks.

Some very large tipper trucks hoist rams can require 40-50 liters of oil to extend. This will be pushing the 'duty cycle' time, potentially causing the auto heat cut-out switch.

Not recommended for very large hoist rams.
Capable of generating up to 200 Bar (3000 PSI) Pressure.
Can be mounted Horizontally or Vertically (Motor Up)
This is a quality motor and pump Manufactured to very high standards.
Please watch the Video below to learn more about our DC power units

• Power Rating 24 DC, 4 KW
• Flow 10 - 14 liters Minute
• Max Pressure up to 200 BAR (3000 PSI)
• Ports 3/8" BSPP
• Safety thermistors are installed in motor windings to prevent overheating.
• Duty Cycle; 150 seconds ON and 1100 seconds OFF.
• Dimensions Length = 39 cm Width =14 cm Height = 20 cm
• Weight 26 KG We also offer ‘Depot to Depot’ freight as a cheaper alternative for larger items.

Please call or email us for this freight option
contact us on 0755 631982.

RE$12-02-2024