Hose Tail - Metric Heavy Male - Straight - Two-Piece Crimp-On

Two-piece crimp-on hose tail: the Metric Heavy Male end DIN 2353 heavy series male stud. Commonly found on high-pressure European machinery. Crimp it with our FS-R2 Multi-Fit ferrule – one ferrule series covers 1-wire, 2-wire, M3K and MXT braided hose, so you stock half the parts.

⬇ Crimp Dimensions Chart (PDF)⬇ Thread Identification Chart (PDF)

Ways to buy:

• Off the shelf – pick your size below and it’s on its way.
• Crimped onto a made-to-length hose – order through our hose assembly builder and we do the crimping.
• Need a size you can’t see? Call us – if it exists, we can get it.

Pick your size

Specifications

How to choose

• First number is the hose bore in dash sixteenths – (08) = 12.7 mm (1/2") hose.
• Second is the thread end – check it with the Thread Identification Chart if unsure.
• One elbow per assembly – if both ends need a bend, use a screw-on elbow adaptor on the second end.

Technicians Advice

Confirm S series by the stamped tube size - an L fitting in an S circuit is a burst waiting to happen.

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.

Express shipping Australia-wide. We dispatch daily to New South Wales, Victoria, Queensland, Western Australia, South Australia, Tasmania, the Australian Capital Territory and the Northern Territory – Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, plus regional and remote sites.