ml955 Gun and Lance Extension

Reach without a longer hose. Extensions bolt between the gun and the lance, or between the lance and the nozzle, and turn a standard wand into something that gets under a chassis, into a wheel arch, or across a truck deck. Straight, bent, 90 degree underbody, single and dual, plus food grade versions with an on/off at the head. All current stock.

Ways to buy this extension:

Choose your length

What is in the box

• One extension as selected
• Handle or grip fitted where the model describes one
• Nozzles are not included
• Food grade versions include the on/off valve at the head

Technicians Advice

Extensions fail at the thread, always, and it is nearly always leverage rather than pressure. Add 700 mm to a wand and you have roughly doubled the bending moment on the gun outlet, and the operator does not feel it because the weight is out at the end. Two consequences worth knowing: never use an extension as a lever to prise or scrape something, and check the gun outlet boss for hairline cracks every few months on any rig that runs long extensions. The other one is thread sealing. These joints are metal to metal with an O-ring on most models, not tapered, so thread tape does nothing except shred and block the nozzle. If it weeps, replace the O-ring, do not wind tape into it. Finally, if you are reaching for a second extension, you actually want a telescopic wand - two extensions on a standard gun is how people end up with wrist injuries and a cracked gun body.

Complete your setup

Browse Single Lances, Wands and TubingBrowse Dual and Hi-Lo LancesAll Lances, Wands and Extensions

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.