Trigger Gun Service kit - Suits RB65 gun

A trigger gun is worth rebuilding. A repair kit is a fraction of a new gun and takes ten minutes on the bench, and most of the guns we sell have one. This listing covers seal and service kits, swivels, triggers, spindles, rubber protectors, handles and the small parts that go missing. Pick the part for your gun model below.

Ways to buy this part:

Replacement trigger gun part - RB65 gun.

Specifications

What is in the box

• One repair kit, swivel or spare part as selected
• Repair and service kits contain the full seal set for that gun as supplied by the manufacturer
• Individual parts are supplied singly unless the description says otherwise

Technicians Advice

Nine times out of ten a leaking gun is a scored seat, not a tired seal, and that is why people fit a kit and it leaks again a fortnight later. Before you order, pull the outlet and look at the seat with a light - if you can catch a fingernail on a ridge, the seal kit will not save it and you need the seat or the valve assembly as well. The other common one: people fit the kit dry. Every one of these seals wants a smear of silicone grease on assembly, not oil and definitely not thread tape wound into the bore. Tape is the single biggest cause of a gun that will not seal after a rebuild, because a shred of it ends up under the ball. Finally, keep the old kit box. The part numbers on these guns change between production runs and the box from the last rebuild is often the fastest way to identify what you actually have.

Complete your setup

Browse Trigger GunsBrowse Trigger Gun GripsAll Trigger Guns and Grips

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.