Taipan Tractor Breakaway Couplers – Rigid Mount Push-Pull

The John Deere style rigid-mount female that lets an implement pull free under load instead of tearing the hose off your tractor. Push-pull sleeve connects against residual pressure; swivel tail stops hose twist. Made in Italy by DNP.

Use the dropdowns to choose your size, then pick a male half, female half, or a pair (1 male + 1 female).

Interchange: ISO 7241-A face — suits standard A-pattern male couplers. Female breakaway half only.

• Rigid mounts in the remote housing
• Breakaway release saves hoses and glands
• Push-pull connect under residual pressure
• Swivel tail - no hose twist

Sizes & Part Numbers

Ratings are the coupled figures from the official Taipan 2024 catalogue - see the datasheets below for full dimensions, flow and interchange charts.

Technicians Advice

Set the mounting so the hose pulls straight out in the breakaway direction - a side-loaded breakaway doesn't release cleanly. Check the swivel still spins freely at each service; a seized swivel quietly kills the hose at the tail.

Official Taipan Datasheets

📄 Breakaway Spec Sheet 📄 Full Coupler Catalogue

Buy in bulk and save: 5+ units −5%, 10+ −10%, 25+ −12.5%, 50+ −15% — applied automatically in the cart.

Need a size or thread you can't see here? Call us on 1300 146 737 or email sales@mhfgc.com.au - if Taipan or DNP make it, we can get it.