Taipan NV Faster Interchange Poppet Couplers (DNP PDV1)

The PDV1 series matches the Faster NV pattern found across Italian and European machinery - the poppet coupler to reach for when your gear arrived from Europe with NV halves already fitted. Made in Italy by DNP.

Use the dropdowns to choose your size, then pick a male half, female half, or a pair (1 male + 1 female).

Interchange: Faster NV pattern — connects with Faster NV, DNP PDV1 and NV-pattern poppet couplers. 1/2" NV is covered by the dual-fit A/NV couplers on our ISO 7241-A listing.

• plated finish steel, hardened poppet contact areas
• Direct NV interchange - no adaptor games
• Nitrile seals, PTFE back-up rings

Sizes & Part Numbers

Ratings are the coupled figures from the official Taipan 2024 catalogue - see the datasheets below for full dimensions, flow and interchange charts.

Technicians Advice

If your machine came from Europe with NV halves fitted, match the pattern rather than adapting to ISO-A - mixed poppet patterns will click together but weep under pressure. Check the male tip profile against the NV chart in the datasheet if unsure.

Official Taipan Datasheets

📄 NV Series Spec Sheet 📄 Full Coupler Catalogue

Buy in bulk and save: 5+ units −5%, 10+ −10%, 25+ −12.5%, 50+ −15% — applied automatically in the cart.

Need a size or thread you can't see here? Call us on 1300 146 737 or email sales@mhfgc.com.au - if Taipan or DNP make it, we can get it.

Express shipping Australia-wide. We dispatch daily to New South Wales, Victoria, Queensland, Western Australia, South Australia, Tasmania, the Australian Capital Territory and the Northern Territory – Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, plus regional and remote sites.