Suttner ST-71 Hose Reel with 15 m Hose

Complete reel and hose package - 15 m of flexible high pressure hose already fitted. There are 2 models below. Pick the one that matches your machine and it is on its way.

Ways to buy this

• Off the shelf - all 2 models listed below are stocked and dispatched direct
• Every model carries its own part number, so you can order the exact replacement without guessing
• Need something outside this range? Call us - we can get most of the factory range in, including sizes we do not list

Pick your outlet thread

What is in the box

• Stainless steel frame with plastic drum
• 15 m of flexible high pressure hose, fitted
• M22 x 1.5 male inlet

Specifications

How to choose

• This is the ready-to-run option - nothing else to buy
• Pick the outlet thread that matches your gun or lance
• If you need more than 15 m, look at the crank reels and buy hose separately

Technicians Advice

M22 x 1.5 male is the standard outlet on most trade and prosumer machines, so this usually plugs straight in. Check yours first - a few Karcher models use a different collar and will need an adaptor.

Wind the hose on with a bit of tension and lay it evenly across the drum. A bunched first layer binds everything above it and you will never get the full length back on. Dump the pressure through the gun before you wind in - reeling a hose with the gun shut traps pressure in the drum and the swivel seal takes the whole load, which is how most reel swivels die.

Fit the locking pin before you drive anywhere; a drum that free-spins on a trailer pays hose onto the road and ruins the cover in one trip. Bolt the mounting plate through with backing plates or a spreader, never straight into sheet - a full drum with water in it is a lot of weight on a lever arm.

Thing on capacity: the rated length assumes nominal OD for that hose class. Two wire hose with a heavy cover will eat 10 to 15 per cent of the rating, so if you are right on the limit, go up a size.

Complete your setup

Hand Crank Hose Reel with 3/8" Pressure HoseBrowse Retractable Spring Rewind Hose ReelsPressure Washer Hose Reel Kit with 3/8in 6,000 psi HoseBrowse Hose Reel SwivelsBrowse all Hose Reels with Hose Fitted

Ordering and delivery

Freight is calculated at checkout on weight and destination. Hose reels are dispatched direct from the Australian distributor, so allow one to three business days to metro areas and a little longer regionally.

Buying in bulk or fitting out a fleet? Call us and we will price the job.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au - real technicians, real answers.