Pressure Washer TP10 Hi-Lo Half Lance

A dual lance gives the operator two jobs off one wand - full pressure for cutting, and a low pressure chemical setting, switched by twisting the head or pulling the collar. No stopping to swap nozzles, no walking back to the machine. Half lances are the short version for confined work and vehicle interiors. All current stock.

Ways to buy this lance:

Choose your size

What is in the box

• One dual or half dual lance as selected
• Grip and handle fitted as described
• Nozzles are NOT included - the Hi-Lo head takes standard screw-on or quick connect nozzles

Technicians Advice

The Hi-Lo head is the part that fails, and it fails from being switched under pressure. The head is meant to be twisted or pulled with the trigger released; do it with 4,000 psi flowing and you shear the internal spool, usually after a few hundred cycles. Train the operator to let go, switch, then squeeze - it doubles the life of the lance.

Thing people get wrong: the low pressure setting only draws chemical if the injector downstream can see the pressure drop. If your machine has a downstream injector and the lance still will not draw, the problem is almost always a blocked injector filter or a nozzle that is too small, not the lance. And do not run a dual lance with an undersized nozzle to get more pressure - all you do is raise the bypass and cook the pump.

Complete your setup

Browse Trigger GunsAll Lances, Wands and ExtensionsNozzles and Nozzle Holders

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.