
Pressure Washer Hose Reel Swivel, suits the 85.402.100 Rapid Reel.
| Model | Suits the 85.402.100 Rapid Reel |
|---|---|
| Part number | 125 85.402.153 |
| hose reels | undefined |
| Built for water. If you want to run mineral oil, air or grease through it, call us first - the swivel seal compound is what decides that, and we will confirm it against the factory data before you buy. | undefined |
| undefined |
Watch the mix of NPT and BSP in this family - use both, sometimes on the same reel with NPT at the inlet and BSP at the outlet. Read the description on each option rather than assuming.
A weeping swivel is almost always the seals, not the body. Pull it down before you order a new one - a seal kit is about a third of the price and takes twenty minutes. Reel swivels are rated to around 30 rpm and are built for intermittent unwind, so do not press one into service on a surface cleaner or a rotating arm; those need a proper high-speed swivel with a bearing pack and will destroy a reel swivel in hours.
Check the thread AND the sealing method before you order. BSP parallel female seals on a cone or an O-ring and wants no tape at all; BSP taper and NPT seal on the thread and want two or three wraps of PTFE with the first thread left bare. Never put tape on an O-ring face seal - it shreds, works into the groove and you have built yourself a permanent leak.
Do the swivel up with two spanners, holding the body. Torquing against the drum twists the band and the reel will never run true again.
Browse Hose Reel SwivelsBrowse Hose Reel Swivel Seal and Repair KitsBrowse all Hose Reel Parts, Swivels and SparesReels supplied with hose