Petrol Pressure Cleaner PP4015D-R - 4,000 psi, 15 L/min, 15 HP

Petrol pressure cleaners go where the power does not. Paddocks, building sites, transport yards, boat ramps, the back of a ute - anywhere you need real pressure and there is no lead long enough. The trade off against electric is noise, fumes and fuel; what you get back is a machine you can put anywhere and 4,000 psi at 15 L/min for a fraction of what the three phase equivalent costs to install.

Ways to buy this machine:

The PP4015D-R is a petrol driven cold water machine rated at 4,000 psi and 15 L/min, driven by a 15 HP engine through a plunger pump.

Specifications

What is in the box

• The pump matters more than the engine. An axial pump is fine for short bursts; a triplex plunger pump is what you want if the machine runs for an hour at a time, and it is rebuildable when it eventually wears.
• These will draw from a tank or a drum as well as a tap, which is half the reason to own one - but check the suction requirements for the model you pick.
• Never run a petrol machine in a shed, a container or an enclosed wash bay. Carbon monoxide is not something you get a second chance with.
• Do not leave the gun closed and the engine running for long stretches. Water in bypass heats up fast and cooks the pump seals.

Technicians Advice

Tell us what you are washing and where, and we will tell you which of these will still be running in five years. We stock the pumps, engines and gearboxes to repair them too, which is worth knowing before you buy.

Complete your setup

Hot water pressure cleanersElectric pressure cleanersEngines, motors and gearboxesPressure cleaner pumps

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.