Categories
ORFS Bulkhead Male x ORFS Male 45° Compact
SKU OBM-ORM-45C-0909
AU$6.40
On Sale
was AU$12.20 Save 48%
Size
Please choose
In stock
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
ORFS Bulkhead Male x ORFS Male 45° Compact
Product Details
Brand: Engmattec
Weight: 0.58 kg
ORFS Bulkhead Male x ORFS Male 45° Compact
Bulkhead adaptors take a hydraulic line straight through a tank wall, panel or chassis plate – the long threaded body passes through the hole and a locknut clamps it tight.
Ways to buy:
- Off the shelf – pick your size from the dropdown below and it’s on its way.
- Need a size or combination you can’t see? Call us – if it exists, we can get it.
Pick your size
| Size / configuration | SKU | Price inc GST |
| Bulkhead - (09) 9/16" ORFS Bulkhead Male x (09) 9/16" ORFS Male - 45° Compact | OBM-ORM-45C-0909 | $6.40 |
| Bulkhead - (11) 11/16" ORFS Bulkhead Male x (11) 11/16" ORFS Male - 45° Compact | OBM-ORM-45C-1111 | $10.50 |
| Bulkhead - (13) 13/16" ORFS Bulkhead Male x (13) 13/16" ORFS Male - 45° Compact | OBM-ORM-45C-1313 | |
| Bulkhead - (13) 13/16" ORFS Bulkhead Male x (13) 13/16" ORFS Male - 45° Compact | OBM-ORM-45C-1313 | 0.50 |
| Bulkhead - (16) 1" ORFS Bulkhead Male x (16) 1" ORFS Male - 45° Compact | OBM-ORM-45C-1616 | |
| Bulkhead - (16) 1" ORFS Bulkhead Male x (16) 1" ORFS Male - 45° Compact | OBM-ORM-45C-1616 | 6.90 |
| Bulkhead - (19) 1 3/16" ORFS Bulkhead Male x (19) 1 3/16" ORFS Male - 45° Compact | OBM-ORM-45C-1919 | |
| Bulkhead - (19) 1 3/16" ORFS Bulkhead Male x (19) 1 3/16" ORFS Male - 45° Compact | OBM-ORM-45C-1919 | 9.80 |
| Bulkhead - (23) 1 7/16" ORFS Bulkhead Male x (23) 1 7/16" ORFS Male - 45° Compact | OBM-ORM-45C-2323 | $39.70 |
| Bulkhead - (27) 1 11/16" ORFS Bulkhead Male x (27) 1 11/16" ORFS Male - 45° Compact | OBM-ORM-45C-2727 | $43.70 |
What is in the box
One fitting as per your selection.
Specifications
| Parameter | Value |
| Brand | Engmattec |
| Material | Carbon steel |
| Thread end 1 | ORFS Bulkhead Male |
| Thread end 2 | ORFS Male |
| Configuration | 45° |
How to choose
- Measure the thread, not the hole – BSP sizes refer to thread size.
- The long bulkhead end passes through the panel; the short end takes your hose or adaptor.
- Going through a tank into a suction line? Step up a size rather than necking suction down.
- Not sure? Call us and we will confirm the size.
Technicians Advice
BSPP parallel threads do not seal on the thread – seal the parallel end with a bonded (Dowty) washer against a machined face, never PTFE tape alone. Drill the panel hole just over the thread OD, deburr both sides, and clamp the locknut on flat metal. Use two spanners: hold the fitting body while you torque the locknut, or you will twist the whole line. On thin or flexing panels, fit a large washer each side to spread the clamp load.
Buying in bulk or fitting out a fleet? Call us for trade pricing.
Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.
Express shipping Australia-wide. We dispatch daily to New South Wales, Victoria, Queensland, Western Australia, South Australia, Tasmania, the Australian Capital Territory and the Northern Territory – Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, plus regional and remote sites.
📐Dimensions & thread sizes – every size in this range
← Swipe the table sideways to see every measurement →
| Part code | H | S1 | Material | Finish |
|---|---|---|---|---|
| OBM-ORM-45C-0909 | 20.6mm | 14.3mm | Mild steel | Plated finish |
| OBM-ORM-45C-1111 | 25.4mm | 19.1mm | Mild steel | Plated finish |
| OBM-ORM-45C-1313 | 31.8mm | 22.2mm | Mild steel | Plated finish |
| OBM-ORM-45C-1616 | 33.3mm | 27.0mm | Mild steel | Plated finish |
| OBM-ORM-45C-1919 | 38.1mm | 31.2mm | Mild steel | Plated finish |
| OBM-ORM-45C-2323 | 44.5mm | 36.5mm | Mild steel | Plated finish |
| OBM-ORM-45C-2727 | 60.3mm | 47.6mm | Mild steel | Plated finish |
Key: H centre to face, S1 hex across flats 2. Measurements in millimetres unless shown otherwise. Thread columns show what each end mates with. Dimensions are nominal – check critical clearances against the part.
Display prices in:AUD
