NPT Swivel Female x UNO Male 45° Compact

45° adaptors take the fight out of hose routing – a gentle set bend that clears obstacles without the tight loop a straight fitting would force.

Ways to buy:

• Off the shelf – pick your size from the dropdown below and it’s on its way.
• Need a size or combination you can’t see? Call us – if it exists, we can get it.

Pick your size

What is in the box

One fitting as per your selection.

Specifications

How to choose

• Match both thread ends to what you are joining; the angle just sets the direction.
• Use a 45° where a 90° would kink flow harder than you need – gentler angle, less pressure drop.
• Set the fitting direction before final torque, not after.
• Not sure? Call us and we will confirm the size.

Technicians Advice

Aim the elbow before you tighten: BSPP ends seal on a bonded washer so final position and seal happen together – plan the last quarter turn to land on your angle. Never use the elbow as a lever to spring a hose into line; the hose should reach naturally with the bend relaxed. Each elbow adds pressure drop, so if a line collects two or three of them, consider re-routing the hose instead.

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.