A modular reducing valve holds one station at a lower pressure than the rest of the manifold. Where a relief valve caps pressure by dumping flow, a reducing valve regulates it — so the clamp squeezes at 50 bar while the machine around it runs at 250.

Pick the pilot port to match which line needs regulating: P for the whole station, A or B for one direction of the actuator.

Other pressure ranges available on request.

Modular valves stack. Each plate you add makes the assembly taller, so the mounting bolts must be longer — the bolt length in the table is what that single plate adds. Add up your stack and order the matching SHCS bolt set; they are not included.