Kohler 20.5 HP Jetting Power Unit - 3,200 psi, 30 L/min, Skid Mounted

Engine, pump and gearbox on one aluminium skid, built as a swap-over unit. If you have a jetting trailer or ute body whose power unit is finished but whose tanks, reel and plumbing are still good, this drops straight in and gives the rig another working life.

It is supplied as a power unit only - see what is and is not included below. We build these to order, so allow around ten working days, and tell us if you want the exhaust exiting the other side or the components arranged differently.

Specifications

What is in the box

• Kohler V-twin engine, mounted
• Comet triplex pump, mounted
• Step-down gearbox
• Easy start adjustable unloader
• Aircraft grade aluminium base plate

Not included

• Fuel tank
• Water tank
• Battery
• Pressure gauge
• Hoses and quick connect couplers

Technicians Advice

At 30 L/min this unit moves serious water, and that is the number that decides what you can clear. It is also more than almost any town tap will supply, so a feed tank is not optional - run it dry and you will be buying a seal kit. If you are swapping this into an existing rig, check your reel swivel and hose are rated above the pump pressure before you plumb it in.

Complete your setup

Browse Drain Jetting MachinesBrowse Pressure Cleaner PumpsBrowse Petrol EnginesBrowse Drain Jetter Reels and Hose Packs