Categories
KHB Ball Valve Replacement Handle - SW9, SW12 and SW14
Store/Valves for Controlling and Directing Oil Flow and Pressure/Ball Valves/Ball Valve Handles & Locking Kits
SKU SW9
AU$8.80
Handle
Please choose
In stock
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
KHB Ball Valve Replacement Handle - SW9, SW12 and SW14
Store/Valves for Controlling and Directing Oil Flow and Pressure/Ball Valves/Ball Valve Handles & Locking Kits
Product Details
Weight: 0.35 kg
KHB Replacement Handle – SW9 / SW12 / SW14
Replacement levers for the KHB series ball valves we sell. Match the SW number to your valve size band and it bolts straight on with the original hardware.
What fits what
| Fits | Part code |
| KHB valves 1/4"-1/2" (6.4-12.7 mm) - SW9 | SW9 |
| KHB valves 3/4"-1" (19.0-25.4 mm) - SW12 | KHBH-12 |
| KHB valves 1 1/4"-1 1/2" (31.8-38.1 mm) - SW14 | KHBH-14 |
The cheapest repair in hydraulics
A ball valve with a snapped lever is almost always a perfectly good valve – the ball, seats and stem are unharmed, because the handle bent instead of the stem. A replacement handle is a five-minute fix at a fraction of the cost of the valve, and nothing like the cost of draining the circuit to change it. If you are not sure which valve you have, email a photo of the body stamping to sales@hydraulic.online.
⭐ Back to the full ball valve range
Technician’s advice
Match the handle to the valve size in the table and seat it fully on the stem flats before tightening the screw. A loose handle rounds the flats and then nothing grips. If a valve is hard to turn even with a new handle, the seats are worn – replace the valve.
Documents
Display prices in:AUD
