
Short link hose that runs from the pump to the ball valve on an A-style jetter reel.
| Cut length | 710 mm |
|---|---|
| Application | Pump to ball valve on A-style jetter reels |
| Media | Built for water. If you want to run mineral oil, air or grease through it, call us first - the swivel seal compound is what decides that, and we will confirm it against the factory data before you buy. |
| Brand |
This is the hose that flexes every time the reel turns, so it works harder than anything else on the rig. Check it whenever you service the pump and keep a spare on the truck - a failure here stops the job.
Reel spares are worth keeping on the truck rather than ordering when it stops. A hose stop is the cheapest insurance on the whole assembly - fit it about 300 mm back from the coupling so the fitting never reaches the guide arm, and a rubber part under fifty dollars saves a swivel and a bent arm.
If the hose is wearing on one edge, the roller guide is out of adjustment or missing, and you will go through another hose before you go through another guide. A reel that will not rewind is a broken spring nine times out of ten, but check the ratchet is disengaged first - sometimes it is simply locked and everyone panics.
Browse Hose Reel SwivelsBrowse Hose Reel Swivel Seal and Repair KitsBrowse all Hose Reel Parts, Swivels and SparesReels supplied with hose
Freight is calculated at checkout on weight and destination. Hose reels are dispatched direct from the Australian distributor, so allow one to three business days to metro areas and a little longer regionally.
Buying in bulk or fitting out a fleet? Call us and we will price the job.
Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au - real technicians, real answers.