MADE IN ITALY – genuine Hydronit COMPACT series spare part

Hydronit Power Unit Manifold Blocks - Cetop 3 and Cartridge

Central manifold blocks for Hydronit COMPACT power units - mount a Cetop 3 valve or screw-in cartridges to build the circuit you need. Every part is a genuine Hydronit COMPACT-series component, made in Italy, in stock in Australia.

Choose your part

Fits

Hydronit COMPACT (PPC) power units - our 12/24 V DC, 240/415 V AC and no-motor compact power units. Not sure it is the right part? Send us your unit code and we will confirm.

Technicians Advice

The central manifold is where you build your circuit – mount a Cetop 3 (NG6) valve on the mount block, or screw cartridges into the 3/4" UNF cavities. Use the correct O-rings/bonded seals, torque to spec, and use thread sealant only on tapered threads, never on the O-ring faces. Blank any unused cavity with the proper plug – a missing plug is an instant leak. Match the port size to your flow so you do not choke the circuit.

Official Datasheets

📄 Hydronit COMPACT Catalogue (PDF)

Hydronit Power Units

12 V DC Compact24 V DC Compact240 V AC415 V ACNo-Motor (Pump + Tank)

Not sure which part you need? Call 1300 146 737 or email sales@mhfgc.com.au with your power unit code and we will match the right spare.