MADE IN ITALY – genuine Hydronit COMPACT series spare part

Hydronit Manual Lever Valve - 2 Position with Microswitch

Manual lever valve (2 position) with microswitch for Hydronit COMPACT power units - hand control with an electrical interlock. Every part is a genuine Hydronit COMPACT-series component, made in Italy, in stock in Australia.

Part number

Fits

Hydronit COMPACT (PPC) power units - our 12/24 V DC, 240/415 V AC and no-motor compact power units. Not sure it is the right part? Send us your unit code and we will confirm.

Technicians Advice

The manual lever valve gives you hand control with a microswitch interlock – the switch only lets the pump run when the lever is in the working position, which stops dead-heading and accidental starts. Wire the microswitch into the start circuit (not across the motor), keep the detent clean, and check the switch continuity if the pump will not start in the lever position.

Official Datasheets

📄 Hydronit COMPACT Catalogue (PDF)

Hydronit Power Units

12 V DC Compact24 V DC Compact240 V AC415 V ACNo-Motor (Pump + Tank)

Not sure which part you need? Call 1300 146 737 or email sales@mhfgc.com.au with your power unit code and we will match the right spare.