Hose Tail – BSP Swivel Female – 45° Elbow – Two-Piece Crimp-On

A BSP swivel female on a 45° swept crimp tail, for taking the hose away at 45° from a BSP port.

Mild steel body with a plated finish, manufactured to the standard listed above.

Two-piece crimp-on – how it goes together

This is the tail (stem) only. A two-piece assembly is the tail plus a separate ferrule crimped over the hose. Our FS‑R2 Multi‑Fit ferrule covers 1‑wire, 2‑wire, M3K and MXT braided hose, so one ferrule series does the lot and you stock half the parts.

🔗 Add the matching FS-R2 Multi-Fit ferrule

Watch: How to Identify Hydraulic Hose Fittings and Hydraulic Adaptors JIC and BSP

Thread Standards

• BSP Swivel Female – BSPP to ISO 228 with a 60° internal cone seat, seals on the cone and swivels, so it needs no tape or sealant

How to Choose

• The bend is formed into the tail, so the angle is fixed. Decide which way the hose has to leave the port before you order – you cannot rotate it after it is crimped.
• Seals on the 60° cone and swivels freely.
• A 45° often fixes a routing problem that a 90° over-corrects.

Technicians Advice

Offer the hose up before committing. A bend pointing the wrong way makes the hose fight the fitting for the life of the assembly.

Where You’ll Find It

• BSP Swivel Female – Hose ends across Australian-built assemblies, and anywhere a joint has to be broken and remade repeatedly.

Cross-Reference

• BSP Swivel Female – BSPP body to ISO 228 with a 60° cone seat. Commonly called a BSP swivel or BSP female cone seat.

Parker, Gates, Aeroquip and Ryco all manufacture to these same standards under their own part numbering, so a fitting built to the standard above will mate with theirs.

Cross-references are given at series level as a guide to the standard, not as a part-for-part substitution. Always confirm the thread form, size and seal type against the port before ordering.

Downloads

📄 Crimp Dimensions Chart (PDF) 📄 Thread Identification Chart (PDF)

Same Threads, Other Angles

🔗 Straight – same threads 🔗 90° Swept – same threads 🔗 90° Compact – same threads

Express shipping Australia-wide. We dispatch daily to New South Wales, Victoria, Queensland, Western Australia, South Australia, Tasmania, the Australian Capital Territory and the Northern Territory – Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, plus regional and remote sites.

Ayrtec two-piece crimp-on hose tails, stocked and dispatched by Hydraulic.Online.

Need a hand? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.