
Hose Reel Stacker Stand, stand only.
| Configuration | Stand only |
|---|---|
| Part number | 125 85.402.109 |
| 85.402.100 crank reel | undefined |
| Two reels | undefined |
| L 40 x W 51 x H 85 cm | undefined |
| Built for water. If you want to run mineral oil, air or grease through it, call us first - the swivel seal compound is what decides that, and we will confirm it against the factory data before you buy. | undefined |
| undefined |
Manufacturer documents for this model, free to download.
The stand is sized for the 85.402.100 Rapid Reel. It will physically hold other drums but the mounting centres will not line up, so check before you buy. Bolt the stand down or ballast it - two full drums up high is top heavy.
Large capacity reels are limited by the swivel, not the drum. The AVM8000FE ships as a 2,900 psi assembly because of the swivel fitted, and the band underneath is already reinforced - fit a 600 bar swivel and you have an 8,700 psi reel. Use a proper anaerobic sealing compound on that swivel thread when you do it, not tape. Before you mount anything this size, work out the loaded weight: 170 metres of 3/8 inch hose full of water is well over 100 kg on the bracket, and that is before anyone leans on it. Fit the drum brake and use it. A big drum that overruns when you stop pulling will throw three or four turns of loose hose off the side and jam itself against the frame.
Browse A-Frame and Heavy Duty Hose ReelsBrowse Hose Reel SwivelsReels supplied with hose