Gutter cleaning kit, small with M22 coupler

The gear that turns a pressure washer into a cleaning system. Acid and chemical injectors in fixed 3:1 and 6:1 ratios, a proper high flow foam gun, a stainless surface cleaner for driveways and warehouse floors, gutter kits that reach over the edge without a ladder, and the accessory kits that start a new machine off with the right ends. All current stock.

Ways to buy this accessory:

Foaming, injection or surface cleaning accessory - Gutter cleaning kit, small with M22 coupler.

Specifications

What is in the box

• One injector, kit, surface cleaner, gutter kit or foam gun as selected
• Accessory kits include the ends and fittings listed by the manufacturer for that machine type
• Chemical is not supplied

Technicians Advice

Chemical injectors are the most misunderstood thing on a wash rig. A fixed 3:1 or 6:1 venturi does not mean your chemical ends up at that dilution on the wall - it means the injector draws one part concentrate to that many parts water AT THE INJECTOR, and then the nozzle and pressure change what actually lands. If your dilution matters (and with acids it does), test it with a measured bucket and a stopwatch rather than trusting the label. Second, flush the injector with clean water at the end of every day, especially after acid. The check ball inside is small, and dried chemical around it is the reason most injectors stop drawing. Third, on surface cleaners: the two nozzles inside are consumables like any other, and when a surface cleaner starts leaving stripes it is almost never the machine, it is one of those two nozzles worn or blocked. Take the cover off and look before you blame the pump.

Complete your setup

Browse Wash, Soaper and Detergent NozzlesBrowse Sandblasting Kits and HeadsAll Foaming, Sandblasting and Wash Accessories

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.