GALTECH Q75 Italian Electric Flow Control Valve 4-Spool 80 LPM

Name: GALTECH Q75 Electric Flow Control Valve | 4 Spool | 80 LPM
Brand: GALTECH
SKU: GALTECH 4 ELEC
Price: 3999.0 AUD
Availability: InStock

Store/Valves for Controlling and Directing Oil Flow and Pressure/Monoblock Directional Control Valves

SKU GALTECH 4 ELEC

AU$3 999.00

Best Value

In stock

Quantity:

Save this product for later

Customer reviews

Reviews only from verified customers

No reviews yet. You can buy this product and be the first to leave a review.

GALTECH Q75 Italian Electric Flow Control Valve 4-Spool 80 LPM

Store/Valves for Controlling and Directing Oil Flow and Pressure/Monoblock Directional Control Valves

Product Details

Brand: GALTECH

Weight: 12.00 kg

GALTECH Q75 Italian made Flow Control Valve 4-Spool, flows 80 Lt/min pressures to 300 bar (4500 psi) fitted with double acting electric solenoid Actuators.

Italian made Quality, from Galtech: Q 75 4 spool electrically actuated hydraulic flow control valve with manual override.

Flows 80 Lt/min, this valve has electrically operated spools. It is designed for Tilt Tray Trucks, Skip Bin Trucks, Front end Loaders, Backhoes or any application where you need to control 4 individual functions via remote control or with on off electric push buttons.

These valves are regularly used in hydraulic circuits to divert the flow of high pressure oil and are typically used to control the speed and movement of hydraulic cylinders or motors.

Standard configuration is a double acting cylinder spool: with 3 position, spring return to centre lever. Also available with Motor spool.

Series Q75.

All sections on these Q-75 monoblock valves are double acting with a three position spring return kit c/w levers and adjustable main relief valve (between 81-200 Bar as standard) set at 150 Bar / 2100 Psi standard.

Options also include full 12 or 24 Volt DC electrically operated. This valve with electric add on's, will be ready to hook up to a remote control unit.

A Power beyond sleeve, gives the option to run a secondary (smaller flow) valve downstream, by turning the 'T' port into a pressure port for additional valve to feed off.

With the power beyond sleeve, they are assembled onto the “tank” port of the valve – this allows it to carry through the high pressure. When you assemble this sleeve, you would also have to remove the plug on top of the valve block for use as a tank line.

Technical Data

- 1/2" BSP service ports

- 1/2" BSP Pressure Ports

- 3/4" BSPP Tank Port

- Max Flow:80 Lt/min

- Max Pressure:300 Bar (4500 psi)

- Max Tank Pressure: 25 Bar

- Operating Temperature: -10°C + 80°C

Specifications

Construction = Monoblock
Material of Construction = Steel
No of Spools = 4
Material of Construction = Case Hardened Steel
O-rings made of NBR (Buna-N®)
Max Flow Rate = 90 liters/min (20 Gallons per Minute)
Max Working Pressure = 300 Bar (4500 PSI)
Spool Type = Cylinder. Motor Spools also available
Spool Movement = Lever action, Spring Return to Center
Built in Relief Valve = Adjustable (factory set at 2200 PSI)
Dimensions. Please refer to photos,
Ports Sizes
Pressure Port 1/2" BSPP
Cylinder Ports 1/2" BSPP
Tank Port 3/4" BSPP
Operating temperature range: -20 °C to + 80°C
Dimensions = 270 mm x 232 mm
Weight 10 KG

Please send us a message for different spool configurations, spool numbers and costings.

This a High Quality Valve and has many outstanding features, including.

built in adjustable relief valve
high performance,
high efficiency,
small volume,
mass flow,
leak resistance.

In additional to compact size, these control valves have fixed and large pull rods to control direction,

Installation ; As per photos, there are a choice of two pressure ports "P" (only use one), two "T"

OUR EMAIL IS – sales@hydraulic.online

Additional information about us...

Tax invoices are supplied with every purchase

Emails will be answered within normal business hours (ie: 8.30am - 5.00pm M-F)

IMPROPER SELECTION, INSTALLATION, IMPLEMENTATION AND/OR OPERATION BY ANYONE OTHER THAN PERSONS WITH APPROPRIATE TECHNICAL AND MECHANICAL TRAINING CAN RESULT IN DAMAGE TO EQUIPMENT OR PROPERTY, SERIOUS PERSONAL INJURY OR DEATH. PROPER PRECAUTIONS AND SAFETY PROCEDURES SHOULD BE IMPLEMENTED PRIOR TO INSTALLATION AND OPERATION OF EQUIPMENT.

MM $ abc