Drain Jetting Turbo Head and Nozzle Driver - 3,600 psi, 21 L/min

A rotating turbo head and multi jet driver for drain clearing. The driver spins the head so a single concentrated jet sweeps the full bore of the pipe - it cuts like a zero degree nozzle but scours the whole wall, which a fixed nozzle cannot do.

This is the 3,600 psi version with a forged brass head with a stainless steel driver. Match it to your machine: the head has to be rated above your pump pressure, and the flow has to be close to 21 L/min or the rotor will not drive properly.

Specifications

What is in the box

• Turbo head
• Multi jet nozzle driver

Technicians Advice

Rotor nozzles are fussy about flow in a way fixed nozzles are not. Too little flow and the head will not spin, too much and you will wear the seat out fast. Get the flow right first and the pressure second. If the head stops rotating mid job it is almost always debris in the driver jets, not a failed bearing - strip and flush it before condemning it.

Complete your setup

Browse Drain Jetting NozzlesBrowse Drain and Sewer NozzlesBrowse Drain Jetter Hose 1/4" and 3/8"Browse Drain Jetting Machines