The 4WMM6 gives you lever control on the standard NG6 pattern. It bolts to the same subplate and the same manifold as a 4WE6 solenoid valve, so a machine can be built manual now and converted to solenoid later without touching a single hose.

Spring return or detent?

Spring return springs back to centre the moment the operator lets go — the safe default, and what you want on anything that moves a load. Detented (the -F versions) stays where it is put, which suits a function that has to run continuously without somebody holding the lever: a conveyor, an auger, a fan drive.

Choose detent carefully. A detented lever will hold a function on with nobody at the controls. On anything that lifts, tips or could trap a person, use spring return.

Subplate and manifold sold separately.