CETOP 5 solenoid Directional Flow Control Valve
These are high-quality CETOP 5 Electric Solenoid Operated Directional valves. These are made to a worldwide standard size & bolt holes etc. CETOP 5 solenoid valves are solenoid operated and control the start, stop, and direction of the oil flow in the hydraulic circuit. It comes complete with solenoids & DIN plugs & bolts. Please note; this listing is ONLY for a Cetop 5 valve, you will require a 'subplate' if intending to make a free-standing control valve. See other listings. This is a simple swap in / out to replace your faulty/old Cetop 5.
Specifications
Construction = Monoblock
Material of Construction = Steel
No of Spools = 1
Material of Construction = Case Hardened Steel
O-rings made of NBR (Buna-N®)
Max Flow Rate = 80 liters/min
Max Working Pressure = 315 Bar (4600 PSI)
Spool Type = Cylinder Spool (Closed Centres), Open, Float, and Tandem Centres are also available at no extra cost,
Spool Movement = Electric Solenoid Coil with illuminated LED din plugs, Spring Return to Center.
Solenoid Coil Voltage 12 Volts DC 24 V DC or 240 AC
Operating temperature range: -20 °C to + 80°C
DM$ 15/05/23