Badestnost Z50 Monoblock Valve – Dual Axis Joystick, 2 Spool, 40 L/min

One joystick, two functions: the factory dual-axis joystick on a Badestnost Z50 twin-spool monoblock gives you loader-style control – push-pull for one ram, left-right for the other, diagonals work both at once. Supplied as a fitted kit, ready to plumb.

Ways to buy:

• Off the shelf: the 2 spool joystick kit below.
• Lever-controlled Z50s (1 to 7 spool) are on the Z50 configurator.
• Need 80 L/min? The Z80 dual-axis joystick kit is one click away.

Pick your kit

What is in each kit

Specifications

How to choose

• Two rams you drive together (lift + tilt, boom + bucket) – this is the kit.
• Over 40 L/min? Take the Z80 joystick kit.
• More than two functions – run a joystick bank plus a standard Z50 alongside; call us to spec it.

Technicians Advice

Joystick valves reward smooth plumbing: mount the valve so the stick sits naturally under the operator’s hand and keep hose runs off the linkage. The joystick assembly services separately from the valve – if the stick gets sloppy years in, it is a bolt-on replacement, not a new valve. Diagonal movements drive both spools at once, so size your pump for simultaneous flow if the machine will work that way all day.

Complete your setup

Badestnost Z50 (Lever Control, 1-7 Spool)Z80 Dual Axis Joystick Kit (80 L/min)

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.

Express shipping Australia-wide. We dispatch daily to New South Wales, Victoria, Queensland, Western Australia, South Australia, Tasmania, the Australian Capital Territory and the Northern Territory – Sydney, Melbourne, Brisbane, Perth, Adelaide, Hobart, Canberra and Darwin, plus regional and remote sites.