Categories
BSP Threaded Cap and Sealing Plug Kit - 18 Sizes, 350+ Pieces in Carry Case
SKU PCK-BSP-PL
AU$325.80
In stock
1
Save this product for later
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
BSP Threaded Cap and Sealing Plug Kit - 18 Sizes, 350+ Pieces in Carry Case
Product Details
Brand: Hydraulic.Online
Weight: 2.50 kg
BSP Threaded Cap and Sealing Plug Kit - 18 Sizes, 350+ Pieces in Carry Case
A complete workshop range of yellow BSP threaded caps and red BSP threaded sealing plugs, 18 sizes and over 350 pieces in a compartment carry case. Caps screw onto BSP parallel male threads, plugs screw into BSP female ports, so every open end on the job gets blanked the moment it comes apart. Pick it up below and it ships from Australian stock.
What is in the kit
| Part | Qty |
|---|---|
| EP434 plug G 1/8" | 28 |
| EP434 plug G 1/4" | 60 |
| EP434 plug G 3/8" | 44 |
| EP434 plug G 1/2" | 20 |
| EP434 plug G 3/4" | 16 |
| EP434 plug G 1" | 6 |
| EP434 plug G 1-1/4" | 2 |
| EP434 plug G 1-1/2" | 2 |
| EP434 plug G 2" | 1 |
| EP500 cap G 1/4" | 50 |
| EP500 cap G 3/8" | 54 |
| EP500 cap G 1/2" | 30 |
| EP500 cap G 5/8" | 8 |
| EP500 cap G 3/4" | 20 |
| EP500 cap G 1" | 8 |
| EP500 cap G 1-1/4" | 4 |
| EP500 cap G 1-1/2" | 2 |
| EP500 cap G 2" | 1 |
Kit contents can change slightly between batches.
Specifications
| Parameter | Value |
|---|---|
| Part number | PCK-BSP-PL |
| Caps | HD-PE high density polyethylene, yellow, flanged grip head, G 1/4" to G 2" (DIN ISO 6149-1 pipe thread) |
| Plugs | HD-PE, red, five complete threads plus integral sealing lip, G 1/8" to G 2" (DIN EN ISO 228-1 / DIN 3852-2) |
| Sizes | 18 |
| Pieces | 350+ |
| Case | Hard plastic compartment carry case |
How to choose
- Most Aussie tippers, truck bodies, farm machinery and power packs are ported BSP: this is the kit for them.
- Working on US-built gear with 37° flare fittings: take the JIC kit instead.
- Mixed fleet, odd sizes or masking for paint: the T-Series tapered kit covers the most ground.
Technicians Advice
A dinged BSP 60° seat weeps no matter how hard you tighten it, and an open port on a dusty site collects grit in seconds. Cap the adaptor and plug the port in the same movement as the fitting comes off. Wind them on by hand, the sealing lip does the work. These are dust and drip protection: swap every plug for the fitting or a steel plug before start-up, and count them back into the case when the job is done.
Datasheet
📄 BSP Threaded Cap and Sealing Plug Kit Datasheet (PDF)
Complete your setup
JIC Flared Cap and Plug KitT-Series Tapered Cap and Plug KitConical Service PlugsSteel JIC Cap and Plug KitNeed help choosing? Call 1300 146 737 or email sales@mhfgc.com.au, real technicians, real answers.
Display prices in:AUD
