BSP Tapered Male Solid Plug

Solid one-piece BSPT plugs with no internal recess – maximum blank-off strength for permanent decommissioning of ports.

Ways to buy:

• Off the shelf – pick your size from the dropdown below and it’s on its way.
• Need the matching cap? See our BSP Swivel Female Cap listing.
• Blanking a whole machine? The made-up kits are better value – see the button below.
• Need a size you can’t see? Call us – if it exists, we can get it.

Pick your size

What is in the box

One plug per unit, priced each.

Specifications

How to choose

• A plug fills a female port or fitting; a cap covers a male end. Male thread showing = you need a cap; open hole = you need a plug.
• Measure the thread outside diameter and match it to the size column – the dash number in brackets is the thread size in 1/16ths of an inch.
• Not sure which thread standard you have? Grab the thread identification chart below or call us with a photo.

Technicians Advice

Use a solid plug where the port is staying blanked for good: no hex socket to fill with paint or corrosion, nothing for an idle hand to undo without a spanner. For ports you will open again for testing or future circuits, fit the countersunk style instead and save the fight later.

Complete your setup

BSP Swivel Female CapBSP Plug and Cap KitThread Identification Chart

Buying in bulk or fitting out a fleet? Call us for trade pricing.

Need help choosing? Call 1300 146 737 or email sales@mhfgc.com.au – real technicians, real answers.