3 Phase 415 V Hydraulic Power Pack, 185 Bar (2,700 PSI) Pressure at a flow of 7.5 Lt/Min.

Designed for industrial machinery, conveyors, presses, punches, benders, tippers & folders small motors, P & T, Double or Single acting cylinders intermittent light duty.

No cost option
Larger Oil Flows available with a corresponding reduction of delivery pressure, .

Heat is the by-product of hydraulic equipment & is one of the major causes of early failure.
For a little extra cost, Oil tanks can be upsized to create a larger oil capacity in order to increase heat soak time and also heat dissipation from a larger surface area.

Please note electric plug cables are not supplied with these units as per Australian law. There is a wiring diagram under the power terminal lid. An Electrician is required by law to hook up.

ROTATION
Mocen AC power units operate with CCW rotation (when looking at the motor fan).
This model comes with a standard with a 2.7 CC pump please call or email us for other options listed below.

Available Options

• P/T= Pressure/Tank (requires the use of a lever control valve)
• D/A= Double Acting (requires pendant/electrical controller), not included see other listings for pendants
• S/A=Single Acting (requires pendant/electrical controller) not included see other listings for pendants

3.0 KW Power Pack Pump Specifications

Pump Size CC / Rev	Flow Lt/Min	Pressure	Pressure	Power Required
@ 2800 RPM	Lt/Min	Bar	PSI	HP
2.7	7.58	193	2800	2.43
3.7	10.36	166	2400	2.86
4.2	11.76	152	2200	2.97
4.8	13.44	131	1900	2.94
5.8	16.24	110	1600	2.99
7	19.60	90	1300	2.93
8	22.40	76	1100	2.83

Please note if you want more Pressure you will be sacrificing Flow &
conversely if you install a larger pump, your max Pressure will reduce.

P/T= Pressure/Tank

D/A= Double Acting

S/A=Single Acting

This is a quality motor and pump Manufactured in Shanghai to very high standards.

Specifications for 2.7cc
The motor has an Aluminium Frame and Cooling fins and is fan-cooled,

• Frame size = 90
• Flow 7.56 liters per Minute @ 2800 PSI (193 BAR)
• Max Pressure up to 193 BAR (2800 PSI)
• Pressure relief valve Factory set at 195 BAR (2825 PSI)
• Ports 9/16 UNO
• 10 Liter capacity Oil tank with combination breather/level plug and separate fill plug.
  larger tanks available up to 38 liters please call for pricing.

Manual Actuation or Override is available on Solenoid Spindles to contact us for this option

Flexible Mounting Positions can be mounted Horizontally or Vertically (With Motor Up)

Dimensions Length = 70 cm Width = 20 cm Height = 24 cm

Weight 28 KG

Please note: In some applications, you should increase the Tank size as a precaution against heat build up.
Oil tanks can be upsized for a little extra cost.

contact us at 0755 631 982, or 1300 1 HOSES

or contact us at; sales@mhfgc.com.au